TRACER EX2 MANUAL WHEELCHAIR BY INVACARE Engineered for reliability and ease of maintenance, it offers adjustable seat heights, interchangeable components and foldable design for easy storage
TRACER EX2 CARBON STEEL FOLDING WHEELCHAIR BY INVACARE
Product Features
DURABLE CARBON STEEL FRAME
Constructed from carbon steel with a silver vein finish to provide long-lasting framework durability and reliable daily performance.
Constructed from carbon steel with a silver vein finish to provide long-lasting framework durability and reliable daily performance.
TRUE DUAL-AXLE POSITIONING
Allows the rear wheels and front casters to be repositioned between standard adult height (19.5") and a lower hemi height (17.5") to facilitate independent foot propulsion.
Allows the rear wheels and front casters to be repositioned between standard adult height (19.5") and a lower hemi height (17.5") to facilitate independent foot propulsion.
STRETCH-RESISTANT INNER LINERS
Features integrated heavy-duty inner liners within the seat and back upholstery to prevent sagging, ensuring continuous postural support.
Features integrated heavy-duty inner liners within the seat and back upholstery to prevent sagging, ensuring continuous postural support.
COMPONENT INTERCHANGEABILITY
Incorporates the design and technology of the Invacare 9000 series, making its front riggings, armrests, and accessories fully cross-compatible.
Incorporates the design and technology of the Invacare 9000 series, making its front riggings, armrests, and accessories fully cross-compatible.
NO-FLEX COMPOSITE WHEELS
Equipped with low-maintenance, flat-free urethane rear tires mounted on rigid composite wheels with dual-sealed precision bearings for a smooth ride.
Equipped with low-maintenance, flat-free urethane rear tires mounted on rigid composite wheels with dual-sealed precision bearings for a smooth ride.
PADDED ARMREST CHOICES
Available in permanent offset styles to optimize seat width space, or removable fixed-height configurations in desk-length or full-length variations.
Available in permanent offset styles to optimize seat width space, or removable fixed-height configurations in desk-length or full-length variations.
INVACARE TRACER EX2 LIGHTWEIGHT FOLDING WHEELCHAIR
Product Specifications
| Specification | Details |
|---|---|
| Weight Capacity | 250 lbs. |
| Product Weight | 36 lbs. |
| Seat Width Options | 16" 18" 20" |
| Seat Depth Options | 16" |
| Seat-to-Floor Height | 17.5" to 19.5" |
| Back Height | 16" |
| Overall Width | Up to 28.50" |
| Folded Width | 13" |
| Overall Height | 53" |
| Front Wheel Size | 8" |
| Rear Wheel Size | 24" |
| Armrest Options | Padded Permanent Removable |
| Legrest Option | Elevating Swing-away |
Product Measurement and Sizing Guide
| Measurement | Details |
|---|---|
| 1 - Seat Depth | Measure from the most posterior point of the body to the inside of the knee, minus at least two inches. Some prefer more leg overhang to make room for their hand when lifting their leg |
| 2 - Back Height | Measured from the seat base to the top of the wheelchair back. Depends on how much upper back support is needed, and also affects freedom for the upper body to rotate. |
| 3 - Rear Seat to Floor | Measurement from the ground to the rear seat edge. Relative to the front seat-to-floor dimension, this determines the rearward slope ("dump" or "squeeze") of the wheelchair seat |
| 4 - Hanger Angle | Determines how far the toes extend away from the body, measured from the horizontal. A tighter angle allows the wheelchair to turn around in less space. Depends in part on ability of the knee to bend towards the perpendicular |
| 5 - Seat Width | Determined by the widest point of the body from knee to hip, plus an inch to ensure room to move. Consider bulk of clothing, particularly a heavy winter coat, if relevant |
| 6 - Wheel Camber | Angle of the wheel relative to the vertical. More camber improves stability and agility, but also limits ability to pass through narrow spaces. A typical daily wheelchair uses three degrees of camber. |
| 7 - Front Seat to Floor | Measure the leg from the back of the knee to the sole of the foot. Then subtract the thickness of the cushion when it is compressed. Next, add a minimum of two inches for footrest clearance. Do not add the footrest clearance if the wheelchair will be foot-propelled® |
| 8 - Footrest Width | Measure from the inside of each legrest tubing the distance or desired distance between legrests |
| 9 - Center of Gravity | Measure from the front of the seat back post to the center of the rear axel. |
| 10 - Seat to Footrest Length | Measure from the edge of the seat upholstery to the top rear of the footrest. |
| 11 - Backrest Angle | Measure the the angle of the back post to the floor. Ninety degrees will be perpendicular to the floor, to approximate the angle from the back post to the seat, subtract two degrees from measurment for every .5" of dump |
TRACER SX5 RECLINER MANUAL WHEELCHAIR BY INVACARE DOWNLOADS
TRACER EX2 RECLINER WHEELCHAIR ORDER FORM TRACER EX2 WHEELCHAIR
USER MANUAL TRACER EX2 RECLINER WHEELCHAIR
BROCHURE
No Buyers info available
5 years: Side frame and cross members
13 months (1 year, and 1 month): Upholstered materials and remaining components
13 months (1 year, and 1 month): Upholstered materials and remaining components
No videos available
