TRACER SX5 RECLINER (STANDARD) BY INVACARE A durable reclining manual wheelchair that provides enhanced comfort, positioning support and reliable mobility for extended seating and pressure relief
INVACARE TRACER SX5 RECLINING MANUAL WHEELCHAIR WITH HEADREST
Product Features
DYNAMIC RECLINE RANGE
Allows the backrest to adjust smoothly from 90 to 180 degrees to accommodate passive positioning modifications and facilitate effective pressure relief.
Allows the backrest to adjust smoothly from 90 to 180 degrees to accommodate passive positioning modifications and facilitate effective pressure relief.
REMOVABLE HEADREST EXTENSION
Provides full neck and head stability via a cushioned pillow attachment when the backrest is reclined, and can be removed to streamline transport.
Provides full neck and head stability via a cushioned pillow attachment when the backrest is reclined, and can be removed to streamline transport.
DURABLE CARBON STEEL FRAME
Built using high-strength carbon steel and 14-gauge crossbraces to maintain long-term structural integrity and support daily weight loads reliably.
Built using high-strength carbon steel and 14-gauge crossbraces to maintain long-term structural integrity and support daily weight loads reliably.
HEAVY-DUTY STRETCH-RESISTANT LINERS
Integrates a reinforced inner layer beneath the dual-embossed upholstery to prevent the seating surfaces from sagging and ensure continuous postural support.
Integrates a reinforced inner layer beneath the dual-embossed upholstery to prevent the seating surfaces from sagging and ensure continuous postural support.
FLAT-FREE URETHANE TIRES
Features low-maintenance tires mounted on rigid composite wheels with sealed precision bearings to deliver a smooth, puncture-free ride on diverse surfaces.
Features low-maintenance tires mounted on rigid composite wheels with sealed precision bearings to deliver a smooth, puncture-free ride on diverse surfaces.
FLIP-BACK REMOVABLE ARMRESTS
Padded armrests flip backward out of the path of motion or detach entirely to allow for unobstructed lateral transfers and easy table proximity.
Padded armrests flip backward out of the path of motion or detach entirely to allow for unobstructed lateral transfers and easy table proximity.
TRACER SX5 FULL RECLINER FOLDING WHEELCHAIR FOR PRESSURE MANAGEMENT
Product Specifications
| Specification | Details |
|---|---|
| Weight Capacity | 250 lbs. |
| Product Weight | 53 lbs. |
| Seat Width Options | 16" and 18" |
| Seat Depth Options | 16" and 18" |
| Seat-to-Floor Height | 17.5" to 19.5" |
| Back Height | 24" and 34" |
| Recline | 90° to 180° |
| Overall Width | Up to 26.75" |
| Folded Width | 13" |
| Overall Height | 53" |
| Front Wheel Size | 8" |
| Rear Wheel Size | 20" 22" 24" |
| Armrest Options | Fixed Height Adjustable Height Removable |
| Legrest Option | Fixed Elevating Swing-away |
Product Measurement and Sizing Guide
| Measurement | Details |
|---|---|
| 1 - Seat Depth | Measure from the most posterior point of the body to the inside of the knee, minus at least two inches. Some prefer more leg overhang to make room for their hand when lifting their leg |
| 2 - Back Height | Measured from the seat base to the top of the wheelchair back. Depends on how much upper back support is needed, and also affects freedom for the upper body to rotate. |
| 3 - Rear Seat to Floor | Measurement from the ground to the rear seat edge. Relative to the front seat-to-floor dimension, this determines the rearward slope ("dump" or "squeeze") of the wheelchair seat |
| 4 - Hanger Angle | Determines how far the toes extend away from the body, measured from the horizontal. A tighter angle allows the wheelchair to turn around in less space. Depends in part on ability of the knee to bend towards the perpendicular |
| 5 - Seat Width | Determined by the widest point of the body from knee to hip, plus an inch to ensure room to move. Consider bulk of clothing, particularly a heavy winter coat, if relevant |
| 6 - Wheel Camber | Angle of the wheel relative to the vertical. More camber improves stability and agility, but also limits ability to pass through narrow spaces. A typical daily wheelchair uses three degrees of camber. |
| 7 - Front Seat to Floor | Measure the leg from the back of the knee to the sole of the foot. Then subtract the thickness of the cushion when it is compressed. Next, add a minimum of two inches for footrest clearance. Do not add the footrest clearance if the wheelchair will be foot-propelled® |
| 8 - Footrest Width | Measure from the inside of each legrest tubing the distance or desired distance between legrests |
| 9 - Center of Gravity | Measure from the front of the seat back post to the center of the rear axel. |
| 10 - Seat to Footrest Length | Measure from the edge of the seat upholstery to the top rear of the footrest. |
| 11 - Backrest Angle | Measure the the angle of the back post to the floor. Ninety degrees will be perpendicular to the floor, to approximate the angle from the back post to the seat, subtract two degrees from measurment for every .5" of dump |
TRACER SX5 RECLINER MANUAL WHEELCHAIR BY INVACARE DOWNLOADS
TRACER SX5 RECLINER WHEELCHAIR ORDER FORM TRACER SX5 WHEELCHAIR
USER MANUAL TRACER SX5 RECLINER WHEELCHAIR
BROCHURE
No Buyers info available
5 years: Side frame and cross members
13 months (1 year, and 1 month): Upholstered materials and remaining components
13 months (1 year, and 1 month): Upholstered materials and remaining components
No videos available
(No reviews yet)
Write a Review
