FreeWheel Wheelchair Attachment

FreeWheel Wheelchair Attachment by Living Spinal

Looking for a lightweight, durable front wheel wheelchair attachment that in seconds quickly and securely clamps to the solid footrest of your rigid-frame manual chair or any folding chair using the Freewheel folding wheelchair adaptor. Once attached, the FreeWheel gently lifts your front casters off the ground turning you into a 3-wheel, all-terrain chair.

With the FreeWheel you can safely push over surfaces that would typically be impossible! Instead of struggling or popping "wheelies" to go over grass, curbs, or down dirt trails, you can now safely push over almost any obstacle. Not only does the FreeWheel make it easier to push yourself, it makes it easier for anyone who is pushing you and you'll feel much more secure being pushed.

"The FreeWheel is the most innovative piece of adaptive equipment available."
- Andrew Hippert

The FreeWheel comes with all you need to set it up on your chair. The initial installation may take approximately 15 min., after that the FreeWheel clamps on in seconds. When you are not using the FreeWheel you can store it on the perch on the back of your chair.

How to Order a Custom Freewheel, or Folding Chair Adaptor

Folding Wheelchairs - Compatibility

Freewheel Weight Capacity - 250 Ibs

Tubing Compatibility - Round horizontal tubing may be 1" or 1-1/8" in diameter

Width between horizontal mounting tubing -  13" to 19"

Side tubing height for mounting: 2 footrests - 6" to 16"

Single footrest - 10" to 16"

Motion Composites wheelchairs, namely the Helio C2 and A7, have a wider diameter bar and will need a Motion Composites Folding Wheelchair adaptor, available in the options above. 

Custom Frames
Standard wheelchair frames have a distance of 4-3/4" from the top of the footrest to the floor. If your chair has a greater distance, please choose the correct measurements from the option dropdown above. 

How to choose the right custom option:

• If your footplate is from 4 1/2"-6 1/2" from the top of the footrest to the floor, you would choose 5 1/2 (freewheel)
• If your footplate is from 5 1/2"-7 1/2" from the top of the footrest to the floor, you would choose 6 1/2 (freewheel)
• If your footplate is from 6 1/2"-8 1/2" from the top of the footrest to the floor, you would choose 7 1/2 (freewheel)
• If your footplate is from 7 1/2"-9 1/2" from the top of the footrest to the floor, you would choose 8 1/2 (freewheel)

*For a child, pick the footplate distance that allows some room for growth. 
*If you have a folding wheelchair, disregard footplate measurements and refer to the folding wheelchair compatibility list above

Flip Up Foot Plate

If your chair has a flip-up foot plate such as the ones seen below, you will need to convert the footplate to an angle-adjustable footplate by purchasing one from the manufacturer. But, fear not! Living Spinal can make that process easy for you. If you also have a TiLite chair, simply select TiLite angle adjustable conversion kit in the options, type in your wheelchair's serial number, and it includes everything you need to get the Freewheel to work. If you have a brand other than Tilite, give us a ring at 619-810-0010 and we'll help you get the angle adjustable footrest ordered so you can use the Freewheel. 

TiLite Angle-Adjustable Footplates 

Do you have a Tilite Rigid chair? Does it have an angle-adjustable footplate? You'll need a special part called the P102 clamp kit. The picture to the right shows the issue that is sovled with this clamp. Simply put, you just need to switch out the clamp that's already on your wheelchair with the P102 so it will work with the Freewheel. 

Combine your Freewheel with All-Terrain SUMO wheels!

For the ultimate off-road manual chair conversion! Available in the checkout options

Easily pop the SUMO wheels on and greatly improve your wheelchair's potential. Pins and spacers will ensure fitment, use the chart below to find what pin size you need, and easily add them with the checkout options. 

Downloads:

Click Here to see the Owner's Manual

Freewheel Folding Adaptor Installation

FreeWheel Wheelchair Attachment Buyer’s Guide

The FreeWheel Wheelchair Attachment is a front-mounted third wheel designed to enhance mobility across rough or uneven terrain for manual wheelchair users. By lifting the front casters off the ground, this attachment improves stability, reduces rolling resistance, and increases freedom of movement in outdoor environments.

FreeWheel Wheelchair Attachment All-Terrain Navigation

The FreeWheel Attachment enables easier travel over grass, gravel, curbs, trails, sand, and snow by reducing the impact of small obstacles that typically impede standard casters. It lifts the front wheels slightly off the ground, turning the wheelchair into a three-wheeled all-terrain vehicle.

Front Mounted Wheel for Wheelchairs Secure Frame Connection

This FreeWheel attachment mounts securely to most rigid and folding wheelchair footrests using a built-in clamp system. The solid locking mechanism ensures stability and control during movement without requiring permanent modifications to the chair.

Lightweight Aluminum Design

Constructed from durable yet lightweight aluminum, the FreeWheel Wheelchair Attachment adds minimal weight while delivering reliable performance. The lightweight build supports easy transport and handling without overburdening the user.

Easy On/Off Installation

The FreeWheel Wheelchair Attachment is designed to be quickly installed or removed without tools. Users can attach or detach it independently, making it ideal for transitioning between indoor and outdoor use or stowing during travel.

FreeWheel Wheelchair Attachment Enhanced Speed and Efficiency

With reduced caster drag and smoother forward momentum, this manual wheelchair attachment allows for faster and more energy-efficient travel. It supports longer outings and reduces upper body strain by minimizing the push force needed on outdoor surfaces.

Compact Storage Bracket Included

When not in use, the FreeWheel Wheelchair Attachment can be stored using the included under-seat storage rack. The bracket keeps the wheel secure and out of the way, making it convenient to carry without interfering with regular wheelchair operation.

FreeWheel Attachment Compatible with Multiple Chair Types

This wheelchair attachment is compatible with a wide range of rigid and folding-frame manual wheelchairs, particularly those with fixed front footrests. Adapter kits may be available for chairs with unique designs or configurations.

Improved Safety and Balance

By stabilizing the front of the wheelchair, the FreeWheel Wheelchair Attachment reduces the risk of tipping forward. It also enhances balance and traction, especially on uneven surfaces or inclines where front caster wheels might otherwise catch or wobble.

FreeWheel Wheelchair Attachment Review

The FreeWheel Wheelchair Attachment is highly regarded by users for its ability to transform a standard wheelchair into an all-terrain solution. Praised for its ease of use, durable build, and significant mobility enhancement outdoors, it is a practical upgrade for active wheelchair users seeking greater independence and exploration.