The 3D printed flex gloves, by Revolution Sports

3D printed racing gloves made with flexible rubber material. The flex in our gloves is a real game changer! Flex allows feeling the pushrim easier through the fingers and thumb of the glove, and feeling power transfer through the palm of your hand. Starts are a breeze being able to squeeze your pushrims. Injury prevention is huge in wheelchair racing! The flex in our gloves absorbs the stress that is normally transferred to your wrist with other hard gloves.

Is pushing in the rain a stress for you? Not anymore! The flex and defined, yet forgiving groove in our glove grabs the pushrim and pushes well wet and dry. Gloves come as shown in main photo. Uncovered with a recess printed into the glove to receive rubber directly, or fabric AND foam.

Sizing:

• You are responsible for choosing your size! Please follow these instructions closely.
• We base our sizing off the 100% glove print. Those two measurements are: 21cm for the MCP joints and 11.5cm for the PIP joints.

NOTE: We are not all made the same! You can order different percentages for Right and Left… make sure you measure both hands!

1) MCP JOINTS (100/21)*(X)=??? Example: If your measurement (X) is 19cm at the MCP joint, your calculation is: (100/21)*19= 90.476… We will always recommend to round up to the closest whole percent, in this case 91%.

2) PIP JOINTS (100/11.5)*(X)=??? Example: If your measurement (X) is 9.5cm at the PIP joint, your calculation is: (100/11.5)*9.5=82,6086.. We will always recommend to round up to the closest whole percent, in this case 83%. Now that you have your two percentages, you need to pick the size for your glove. We would recommend choosing the higher percentage of the two measurements, but ultimately the decision is yours. If you’re feeling unsure about any of these measurements or choices, please let us know! We are happy to help out..

Flex Racing Gloves, by Revolution Sports Buyer’s Guide

The Flex Racing Gloves, by Revolution Sports are performance gloves designed for wheelchair racing and high-output propulsion. The Flex Racing Gloves, by Revolution Sports function as a protective interface between the user’s hands and pushrims, reducing friction, improving grip consistency, and managing impact forces generated during repeated propulsion cycles.

Flex Racing Gloves, by Revolution Sports Grip Surface Design

The Flex Racing Gloves incorporate a high-friction palm surface that increases contact control between the hand and the pushrim. This surface is engineered to maintain grip under both dry and high-moisture conditions. Consistent grip reduces slippage during propulsion. It allows more direct transfer of force from the user’s hand to the wheel.

Revolution Sports wheelchair racing gloves Material Construction

The Flex Racing Gloves are constructed using layered materials that balance flexibility with abrasion resistance. The outer surfaces are designed to withstand repeated contact with pushrims without breaking down. Material selection affects durability during high-frequency use. It ensures the gloves maintain structural integrity over time.

Flexible Design

The Flex wheelchair racing gloves are designed to allow full articulation of the fingers and hand joints during propulsion. The construction supports natural hand movement without restricting flexion or extension. Maintaining hand mobility is critical for propulsion efficiency. It allows users to adjust grip and release timing during movement.

Flex Racing Gloves Breathable Paneling

The Flex Racing Gloves, by Revolution Sports include breathable sections that allow airflow across the hand during use. These panels reduce heat buildup during extended propulsion sessions. Airflow helps manage moisture accumulation. It maintains consistent hand contact with the glove interior.

Adjustable Sports Closure System

The wheelchair racing gloves use an adjustable closure system to secure the glove around the wrist. This allows users to control how tightly the glove fits during activity. A secure fit prevents movement between the glove and hand. This ensures consistent grip performance during propulsion.

Flexible Wheelchair Racing Gloves Sizing and Fit Range

The Flex Racing Gloves are available in multiple sizes to accommodate different hand dimensions. Proper sizing ensures that the glove conforms to the hand without excess material. Correct fit improves control. It prevents bunching or slipping during use.

Sports Surface Protection

The Revolution Sports wheelchair racing gloves provide a protective layer between the skin and pushrim surfaces. This reduces direct friction that can lead to skin breakdown during repeated propulsion. Protection is critical in high-use scenarios. It allows users to maintain consistent propulsion without interruption.

Maintenance and Cleaning

The Flex Racing Gloves are machine washable, allowing for regular cleaning after use. The materials are selected to retain their structure after repeated washing cycles. Maintaining cleanliness supports long-term use. It prevents buildup that could affect grip performance.

Built for Wheelchair Racing

The wheelchair racing gloves are designed specifically for high-speed wheelchair use, where propulsion frequency and force output are elevated. The glove structure supports repeated push cycles without degradation in grip. This makes them suitable for racing and training. They perform consistently under high-demand conditions.

Flex Racing Gloves, by Revolution Sports Review

The Flex Racing Gloves, by Revolution Sports function as a propulsion interface that improves grip consistency, protects the hands, and maintains control during repeated push cycles. Their material construction, adjustable fit, and breathable design support sustained performance in wheelchair racing environments. For users engaged in high-output wheelchair activity, the Flex Racing Gloves, by Revolution Sports provide a structured solution for managing friction, grip, and hand protection.