AL815CC Crew Cab 150 Speed Truck Lift for Wheelchairs by Harmar
The AL815CC Crew Cab 150 Speed lift is a powerful, crew cab-tailored solution, providing seamless, fully powered lifting and rotation for 135 lb mobility aids.
The Harmar AL815CC Crew Cab 150 Speed lift, a side-loading solution for manual wheelchairs, fits in crew cab pickup truck beds. It offers placement options for driver or passenger sides.
Arm adjustability ranges from 46.5" to 67", with a 135 lb lift capacity. This model is faster than the Harmar AL825CC, controlled via hand control and dash switch. Its offset base optimizes truck bed space, and an anti-rotate strap prevents chair spinning.
A user-friendly, weather-resistant hand control ensures easy operation. When ordering, specify installation side and ensure bed height does not exceed 24".
AL815CC Crew Cab 150 Speed Key Features
The AL815CC is optimal for manual wheelchairs, powerchairs, and scooters weighing up to 135 lb.
Compatible with most crew cab trucks.
This hoist lift provides fully powered lifting and rotation.
Twice the speed of the AL825CC
Longer arm for crew cabs (reduced capacity)
Delivers chair close to driver or passenger side door
Powered lifting and rotation
Mounts on either side of vehicle
Only two motors to control with remote hand control
Docking device included
New Hand Control
Factors to Consider Before Making a Decision
Hoist lifts require specific user capabilities for safe and proper operation. These include:
- Walking from the front to the rear of the vehicle and back.
- Standing for up to three minutes while the lift operates.
- Attaching the docking device to the mobility device.
- Folding down the seat back of the mobility device and/or scooter tiller until it is in its most compact position.
- Applying pressure to hold down a button on the handheld control while the lift operates.
- Guiding the mobility device to avoid interference while raising, rotating, and entering the vehicle through the complete lift cycle.
- May require bending over or kneeling, adequate hand dexterity, as well as balance and strength to attach the docking device.
The AL815CC is compatible with most crew cab trucks; however, we invite you to fill out the form completely when shopping for your lift.
With its lifting capacity of 135 lb, the AL815CC is a great fit for virtually any manual wheelchair, small powerchair, or scooter.
AL815CC Crew Cab 150 Speed Vehicle Lift Specifications
Crew Cab 150 Speed Truck Lift Downloads
AL815CC Crew Cab 150 Speed Truck Lift for Wheelchairs by Harmar Buyer’s Guide
The AL815CC Crew Cab 150 Speed Truck Lift for Wheelchairs by Harmar is a high-performance mobility lift engineered specifically for pickup trucks with crew cabs. Designed to lift and stow power wheelchairs or scooters into the truck bed, this dual-arm lift delivers quick, stable, and secure transfers with precision and ease.
AL815CC Crew Cab Truck Lift Dual-Arm Design for Stability
The AL815CC Truck Lift features a dual-arm lifting system that provides greater stability and control during loading. This design minimizes swaying and improves alignment when moving mobility devices into the truck bed.
Fast Operation
Equipped with a high-speed motor, the Crew Cab 150 speed truck lift significantly reduces the time required for loading and unloading. This quick performance is especially useful for users who need efficiency during daily routines or frequent travel.
Designed for Crew Cab Trucks with Short Beds
The AL815CC mobility device lift is purpose-built for crew cab trucks with shorter bed lengths. Its extended reach and precise pivoting arm ensure mobility devices are lifted and placed properly into tight or compact truck beds without interference.
AL815CC Power Wheelchair Lift Remote Hand Control
A handheld remote control allows users to operate the crew cab truck lift from a safe and convenient position. The wired remote makes it easier to monitor the device during transfer and allows for independent use when necessary.
Harmar AL815CC Crew Cab Truck Lift Heavy-Duty Construction
The AL815CC Crew Cab Truck Lift is built from rugged steel and protected with a weather-resistant finish. It is capable of lifting mobility equipment up to 135 lbs, making it suitable for most power chairs and smaller scooters.
Compact Design Preserves Truck Bed Space
Once installed, the AL815CC lift’s compact profile leaves much of the truck bed usable for other cargo. Its mounting position at the corner of the truck bed offers a balance between lift accessibility and storage convenience.
Ideal for Power Wheelchairs and Small Scooters
With a 135 lb capacity, the AL815CC can lift most compact power wheelchairs and travel-size scooters. The adjustable arm and hook system accommodate a wide variety of mobility device designs.
AL815CC Crew Cab 150 Speed Truck Lift for Wheelchairs by Harmar Review
The AL815CC Crew Cab 150 Speed Truck Lift for Wheelchairs by Harmar stands out for its fast lift speed, dual-arm stability, and crew cab compatibility. Users consistently note its reliable performance in tight truck bed spaces and appreciate the ease of use provided by the remote control. Its durable build and specialized design make it a practical solution for transporting power mobility equipment in crew cab trucks.
No Buyers info available
HARMAR VEHICLE LIFT WARRANTY
Harmar Mobility warrants its lift products against defects in material, mechanical and electrical components (parts), excluding labor cost, batteries, paint and covers, for a period of three (3) years from date of retail purchase, provided that the products have been installed, maintained and operated properly.
This warranty does not cover:
- Defects in vehicles on which Harmar products are installed.
- Defects in Harmar products caused by defects in any part of the vehicle upon which the product is installed.
- Maintenance or adjustments.
Harmar will not be charged for labor, consequential damage or repair expenses. Harmar will not, under any circumstances, be liable for the loss of the use of its products or loss of time.
This warranty becomes null and void if the product has been lost, damaged by accident, over-stressed, misused and/or neglected, or if the product has been modified in any way.
Defective parts must be returned, prepaid, to Harmar at the address listed above, for inspection prior to credit, repair or replacement, at Harmar’s option. Harmar’s sole obligation and the exclusive remedy under this warranty is limited to such credit, repair or replacement.
This Express Warranty is in lieu of all other warranties or conditions, including all implied warranties or merchantability or fitness for a particular purpose, and there are no warranties that extend beyond the description of the limited warranty described herein. This warranty gives you specific legal rights and you may also have other legal rights which vary from state to state.
No videos available
