FreeWheel Folding Wheelchair Adapter Wheelchair Attachment - K0108
Specially machined to fit the tubing on Motion Composites Helio C2 and A7 Wheelchairs
The FreeWheel Folding Wheelchair Attachment brings the amazing independence and freedom of the FreeWheel, to folding wheelchair users. The folding wheelchair adaptor uses horizontal tubing to securely clamp onto a folding wheelchair. The adaptor adds both strength and rigidity to support the use of the FreeWheel. |
 |
 |
Once it is set up, it can be taken off or put back on in a matter of seconds, but it does not need to be removed to fold the chair. After the adaptor is placed on your folding chair, it quickly and easily clicks into the FreeWheel, gently lifting your front casters off the ground to transform your standard folding wheelchair into a 3-wheel, all-terrain wheelchair that can push you safely over almost any obstacle. |
SPECIFICATIONS
SPECIFICATIONS
| Need 2.5" of horizontal side tubing to attach Folding Wheelchair Adaptor. May be angled, as long as the sides are parallel. |
|
Clamp ends which attach to the frame are 1.25" in diameter to fit the Motion Composites Model folding chair Helio C2 and Helio A7 Note: The motion composites folding chair adapter doesn't fit the oval shape of the folding chair on Model Veloce. |
| Width between horizontal mounting tubing 13" to 19" |
| Side Horizontal mounting tubing height: 2 footrests 6" to 16". Single footrest 10" to 16" (Must come out on top of single footrest) |
| FreeWheel clamps on to "HITCH" |
| Easily remove Adaptor by unscrewing knobs on side tubing |
| Maximum footplate height off ground can only be 4" on single footrest |
|
Adaptor Weighs 3.5 lbs max personal body weight for the adaptor is 250lbs. Note: Note: ALWAYS use the shortened FLAT SHIM that comes with the ADAPTOR, not the flat shims from the FreeWheel box. |
Note: The motion composites folding chair adapter doesn't fit the oval shape of the folding chair on Model Veloce.
No videos available
