null
Created with Sketch. Created with Sketch.
Wheelchair anti tippers with adjustable 5 to 7 inch push button bars for 7/8 inch tube frames

Living Spinal

Wheelchair Anti Tippers: Anti Tip Bars, Roller & Rubber Tip Styles

Stop backward falls on ramps, curbs and hills. Universal anti tippers for 7/8" tube wheelchairs, chosen by people who roll every day.

Shop Wheelchair Anti TippersRoller, rubber tip, push button & front styles below
✓ Run by wheelchair users ✓ HSA/FSA accepted ✓ Free fit help

Wheelchair anti tippers keep your chair from flipping backward when you hit a curb, climb a ramp or lean back. These anti tip bars mount behind the rear wheels and catch the chair before a wobble becomes a fall.

We carry universal anti tippers, roller anti tippers, rubber tip anti tippers and front styles for 7/8" tube frames. Living Spinal is owned and operated by people living with paralysis who use this equipment, so we know how much a little extra wheelchair stability matters. Tap any section below, or read our Wheelchair Resource Guides.

›

Why Use Wheelchair Anti Tippers?

Universal rear wheelchair anti tippers with rubber tips and push button mounts for 7/8 inch tubing

A rear tip is one of the most common wheelchair falls. It happens on a curb, a steep ramp, or when you lean back to reach something. Wheelchair anti tippers are short bars that mount to the frame behind the rear wheels and catch the chair before it goes over.

  • Real wheelchair stability: the bar stops a backward tip a few inches off the ground, so a wobble does not become a fall.
  • Confidence on ramps: anti tippers for wheelchair users help on van ramps, steep driveways and uneven sidewalks.
  • Safer for new riders: people learning to push, or still finding their balance point after an injury, get a safety margin.
  • Peace of mind for caregivers: attendants can tilt and push with less worry about the chair going too far.
  • Easy to remove: push button and swing-away styles come off when you want to pop a wheelie or load the chair in a car.
Stay grounded, stay safe: call Living Spinal at (619) 810-0010 to secure your ride with wheelchair anti tippers

Real-world advice: Our team rolls every day. Many of us run anti tippers set high, so they only touch down on a real tip and never drag on curbs or bumps.

›

How to Choose the Best Anti Tippers for Your Wheelchair

5 to 7 inch adjustable wheelchair anti tippers with push button style mount for 7/8 inch tube frames

The best anti tippers are the ones that fit your frame and match how you ride. Check these six things before you buy:

Tube Diameter

Most universal anti tippers fit 7/8" tubing. Measure the frame tube where it will mount before you order.

Mount Style

Clamp-type mounts bolt around the tube. Push button mounts slide into a receiver and pop out by hand.

Wheel or Rubber Tip

Roller wheels glide if they touch the ground. Rubber tips grip and stop the chair firmly.

Length & Height

Adjustable 5" to 7" bars let you set clearance so they catch a tip but clear curbs.

Rear or Front

Rear anti tippers stop backward falls. Front anti tippers help on chairs that pitch forward on slopes.

Removable or Fixed

Removable bars suit active riders. Fixed bars suit full-time safety needs and caregiver use.

Quick match

  • Pushing yourself every day? A push button anti tipper you can pull off for curbs and car transfers.
  • Pushed by a caregiver? A fixed roller anti tipper that stays on and rolls if it touches down.
  • Steep ramps or hills? Rear anti tippers set low, plus front anti tippers if the chair pitches forward.
›

Types of Wheelchair Anti Tippers: Roller, Rubber Tip & Front

Chrome roller type wheelchair anti tippers with clamp style mounting for 7/8 inch tubing

From roller wheels to rubber tips, here is how the main anti tip wheelchair options compare.

Roller anti tippers

Small wheels on the end roll along the ground instead of scraping. The Roller Type Clamp Style Anti Tippers clamp onto the frame and stay put, which suits caregiver-pushed and full-time chairs.

Rubber tip anti tippers

A rubber foot grips the floor and stops the chair firmly. Choose the Universal Rear Anti Tippers With Clamp-Type Mounting for a fixed setup, or the Universal Rear Anti-Tippers With Push Button Mount if you want to remove them by hand.

Adjustable push button anti tippers

The 5-7" Push Button Anti-Tippers adjust in length, so you can fine-tune clearance as your seat angle or wheel size changes.

Front anti tippers

Front Roller Anti Tippers mount near the casters and help stop a forward pitch on downhill slopes. They pair well with wheelchair foot supports for riders who need extra support.

Not sure which anti tipper fits your frame? Send us your chair model and tube size, and we will match the mount.

›

Universal Anti Tip Bars vs. TiLite, Quickie & Ki Mobility Parts

Universal wheelchair anti tip bars with rubber tips and clamp-type mounting for 7/8 inch tube wheelchairs

Universal wheelchair anti tippers are made for standard 7/8" tube frames. Many rigid and folding chairs from TiLite, Quickie and Ki Mobility use their own receivers, so it pays to check before you order.

What to compare

  • Frame tube size: universal clamp and push button anti-tippers fit 7/8" tubing. Larger or oval tubes may need a brand part.
  • Existing receivers: if your chair already has anti tip sockets, match the pin size. Pair them with wheelchair straps and wheelchair brakes and locks for a complete safety setup.
  • Axle position: chairs set up "tippy" with the axle forward need anti tippers that sit a little lower.

Browse more wheelchair parts and accessories, or see all wheelchair accessories for your chair.

Pro tip: Snap a photo of the frame tube right behind the rear wheel and send it to us. It is the fastest way to confirm fit.

TiLite, Quickie or Ki Mobility chair? We will tell you if a universal bar fits or if you need a brand part.

›

How to Install Anti Tippers on a Wheelchair

Front roller anti tippers with clamp style mount ready to install on a wheelchair frame

Most wheelchair anti tip bars install in about 15 minutes with basic tools. Here is the checklist our team uses:

1. Measure the tube

Measure the lower frame tube behind the rear wheel. Universal anti tippers fit 7/8" tubing.

2. Mount the brackets

Slide or clamp the brackets onto the tube, level on both sides. Snug the bolts but leave them loose enough to adjust.

3. Set the clearance

Set the bars about 1.5" to 2" off the ground with you seated. Lower is safer, higher clears curbs better.

4. Tighten and test

Tighten every bolt, then lean back slowly with a spotter. The bars should catch the chair before it feels unstable. Our Wheelchair Resource Guides has more setup tips.

›

Wheelchair Anti Tipper FAQs

Do anti tippers stop you from doing wheelies?

Yes, when they are set low. Many active riders use push button styles and remove them, or set them higher, when they want to pop the casters over curbs.

Should anti tippers touch the ground?

No. They should sit about 1.5" to 2" above the floor so they only touch down when the chair starts to tip.

Do power wheelchairs need anti tippers?

Most power chairs come with anti tip wheels built in. Our universal anti tippers are made for manual wheelchairs with 7/8" tubing.

Can I use HSA/FSA, financing, or coupons?

Yes. We accept HSA/FSA cards, financing is available, and you can check our latest coupons and promo codes before you check out.

Roller type wheelchair anti tippers from Living Spinal

Not sure which anti tipper fits? Let's check together.

Living Spinal is run by people living with paralysis, and our product specialists use wheelchairs every day. Tell us your chair model and frame tube size, and we will help you pick anti tippers that fit and set them up right.

Mon–Thu 9AM–5PM · Fri 9AM–3PM · Sat–Sun 9AM–5PM (CST)

Or leave your info and we'll reach out.

Check out these other categories

Wheelchair Parts & Accessories  ·  Wheelchair Straps  ·  Wheelchair Foot Support  ·  Wheelchair Brakes & Locks  ·  Manual Wheelchairs  ·  Wheelchair Accessories