SnapIt! Wheelchair Cell Phone Holder
Holds most large display phones with exterior dimensions less than 2.65" W X .65" D or less than 2.0" W X 1.1" D. Flexible fingers can be positioned to hold phone snugly. Overall Height 3.5". Includes SnapIt! System MultiMount Bracket with hardware for attachment to wheelchairs, walkers, rollators, crutches and electric scooter handlebars.
>Snap in clip on SnapIt! System MultiMount Bracket is designed to fail in the event of accidental contact with a hard surface in order to protect the cell phone holder from damage. In the event of clip failure please contact Living Spinal at 619-810-0010 for a free clip replacement.SnapIt! Tubing Diameter Size Chart
| Fractions | Decimals | Metric | Flat Length |
| 3/4" | .75" | 19mm | 2.356" |
| 7/8" | .875" | 22mm | 2.75" |
| 1" | 1" | 25mm | 3.142" |
| 1-1/8" | 1.125" | 29mm | 3.53" |
| 1-3/16" | 1.1875" | 30mm | 3.73" |
| 1-1/4" | 1.25" | 32mm | 3.927" |
Step 1) Find a piece of paper measuring at least 4" x 1"
Step 2) Now wrap the piece of paper around the section of tubing you would like to mount your SnapIt! cup holder.
Step 3) While the paper is wrapped around the tube, mark the end of the piece of paper with a pencil. This will measure the entire circumference of the tube.
Step 4) Now measure from the end of the paper to the mark with a ruler.
Step 5) Look at the table above. Find the "Flat Lenght" and it's correlating "Diameter in Fractions", "Diameter in Decimals" and "Diameter in Metric"
Now you will have the diameter of the tube!
No Buyers info available
No videos available
