One pair for each wheel

NuDrive consists of two drive units and two wheel adaptors

Its ‘Snap-Lock’ technology allows the Wheel Adaptor to be fitted in seconds, without altering any of the wheel configurations. Once in place, the lightweight design adds no width and can be left unobtrusively positioned on the wheel, if you need to remove your wheels for transport. When you want to use NuDrive, the drive units can simply be clicked into place and then removed when finished.

To propel the chair

To propel the chair, first put NuDrive into ‘drive mode’ with an effortless outward flick of the levers. Once in ‘drive mode’ you can propel yourself forward simply by pushing the levers. To brake and steer, pull the levers inward, towards the body. NuDrive’s intuitive braking system also makes reversing easy: first return to ‘neutral mode’ with another outward flick of the levers, and then using the product brakes, grip and move the wheels in the desired direction.

NuDrive Air

NuDrive AIR can be fitted to all manual wheelchairs in a matter
of minutes. Straight from the box!

The wheelbase units fits the majority of standard wheelchair
wheels and with the three different rimadapter sets provided
with the NuDrive AIR, you are ready to go shortly after opening
the box.

NuDrive AIR is the perfect solution when you want to use the pushrims at home and the lever drive outside. The levers literally snaps in and out of the wheelbase units in seconds.

NuDrive Air Ergo

NuDrive AIR Ergo provides a more dynamic and ergonomic grip of
the handles. It is the perfect solution for more active users and for
children or young people who can benefit from having the hands
closer to the body.

With the handles bend slightly inwards against the body your
hands are placed in an even more natural position for pushing
and pulling the levers back and forth, reducing loads on the wrists
even further.

NuDrive AIR Ergo can be fitted onto most manual wheelchairs but
may not be the optimal solution if the wheelchair carries armrests.
NuDrive AIR Ergo is available with the standard transmission as
well as the EASY CONTROL transmission.

Step 1: TRANSMISSION

Step 2 – FORWARD DRIVING

Step 3 – BRAKING

 Step 4 – TURNING

Step 5 – 5 CHANGING DRIVE RATIO

Step 6 – INCLIMB

1. You must measure the inner diameter of your wheel. In the table you can read the possible inner diameter range the NuDrive can fit into depending on which of the three different sets of adapters, that is supplied with the NuDrive, is being used.

NuDrive 22” version: 

• ADAPTOR 1: 7.40 – 48.90 cm (18.68” – 19.25")
• ADAPTOR 2: 46.40 – 47.90 cm (18.27” – 18.86”)
• ADAPTOR 3: 46.40 – 47.90 cm (18.27” – 18.86”)

NuDrive 24”/25” version:

• ADAPTOR 1: 52.50 – 54.00 cm (20.67” – 21.26”)
• ADAPTOR 2: 51.50 – 53.00 cm (20.28” – 20.87”)
• ADAPTOR 3: 51.50 – 53,00 cm (20.28” – 20.87”)

2. You must determine if your rim shape and width are compatible with any of the adapters 1, 2 or 3.

• Adaptor #1: Suitable for flat rims 22-24 mm (0.86” – 0.94”) wide 
• Adapter #2: Suitable for high profile rims 21-23mm (0.82” – 0.90”) wide 
• Adapter #3: Suitable for high profile rims 18-20 mm (0.71” – 0.78”) wide